Radwag WLC F1 Precision Balances
Precision balances enable fast and accurate determination of mass in laboratories and industry. The devices are equipped with RS232 connector and an internal battery. Stainless steel weighing pan, backlit LCD display.
Readability [d]: 0.01g - 2g
Maximum capacity [Max]: 1kg - 120kg
Radwag WLC Precision Balance
Model |
Weighing capacity (kg) |
Division (g) |
| WLC 6/F1/R | 6 | 0,1 |
| WLC 6/F1/K | 6 | 0,1 |
| WLC 12/F1/R | 12 | 0,2 |
| WLC 12/F1/K | 12 | 0,2 |
| WLC 30/F1/R | 30 | 0,5 |
| WLC 30/F1/K | 30 | 0,5 |
| WLC 6/12/F1/R | 6 / 12 | 0,1 / 0,2 |
| WLC 6/12/F1/K | 6 / 12 | 0,1 / 0,2 |
| WLC 12/30/F1/R | 12 / 30 | 0,2 / 0,5 |
| WLC 12/30/F1/K | 12 / 30 | 0,2 / 0,5 |
Communication interfaces: 2×RS232, USB type A, USB type B. The interfaces enable cooperation with peripheral devices, e.g. printer, computer, USB flash drive, additional display. The WLC balances feature real-time clock and ALIBI memory. Optionally, they can be equipped with 4 IN / 4 OUT.
-
Levelling system manual
Display LCD (backlit)
Weighing pan dimensions 300×300 mm
Packaging dimensions 570×390×170 mm
Net weight 5.2 kg
Gross weight 6 kg
Protection class IP 43
Communication interface RS232
Power supply 100 — 240 V AC 50/60 Hz and battery
The operation time on batteries 10 h (average time)
Operating temperature +15 — +30 °C
Relative humidity 10% — 85% RH no condensation
-
Plus / Minus Control
Control of sample mass is carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. Graphic visualisation of weighing results is displayed in a form of a bar graph.
Percentage Weighing
Percent Weighing function is used for comparison of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.
Totalizing
Function adding new mass value to already obtained one. This allows determining mass content of the mixture, being a composition of a number of different consistence components. Totalizing is limited by the maximum capacity parameter.
Parts Counting
Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supported by a mechanism of Automatic Correction of Accuracy. This allows updating single item mass in course of the process. To a certain extent, Automatic Correction of Accuracy eliminates errors that may be a result of different mass values of seemingly alike single elements. For industry solutions item counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature an audio signalling base informing that a specified number of items has been weighed. It is possible to apply weighing systems using a few platforms of different MAX capacities and different accuracies.
Internal Battery
Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.
Peak Hold
Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.
